DEMONSTRATION OF MACHINES
 

Portrait engraving on SAUNO Graphic-3KP machine
 

Film content:

- Turn on the machine, manual movement mode.

- Installation of the workpiece (tile).

- Adjust the size and indentation of images on a stone in the program Engrave.

- Image engraving. Adjust the force of impact.

- Pause mode. Turning off the machine, the resumption of engraving after turning on.

Detailed instructions for setting up SAUNO machines:

- Workplace and power requirements

- Install USB adapter - COM-port (only for versions 5.x, 6.x, 7.x)

- Installing the Engrave program

Movie 1. Laser engraving of the portrait on SAUNO Graphic-3KL machine


Film content:

- Turn on the machine, manual movement mode.

- Installation of the workpiece (tile) in the machine.

- Set the parameters of engraving (resolution, speed, exposure, power) in the Engrave program.

- Adjust the size and indentation of images on a stone in the program Engrave.

- Image engraving. Power adjustment.

- Pause mode. Turning off the machine, the resumption of engraving after turning on.

Film 2. Laser engraving of a portrait on a Karelian stone


The entire process of portrait engraving on a Karelian gabbro with a heterogeneous structure is shown, including setting the engraving parameters and painting the portrait after engraving.

Carving on the SAUNO Graphic-3KS machine


You will learn:

- How to get to the zero point of the machine.

- How to operate the machine in the manual movement mode.

- How to install the tool at the zero point of the workpiece.

- How to scan the surface of the workpiece for tracking level.

- How to adjust the feed rate during operation.

- How to pause and continue working.

- How to interrupt work with the shutdown of the machine and the computer and the subsequent continuation.

SAUNO LLC.
4460 West Lexington, 60624 Chicago. IL
 
www.sauno.us